6. A register can be either static or dynamic.
(a) Shift
(b) Parallel
(c) Bit
(d) None of the above
7. An n-bit register has a group of ________ flip-flops and some logic gates.
(a) N
(b) N-1
(c) N2
(d) 2N
8. A register can also be used to provide __________ movements.
(a) Bit
(b) Data
(c) Signal
(d) None of the above
9. Data can be changed from special code to temporal code by using :
(a) Shift registers
(b) counters
(c) Combinational circuits
(d) A/D converters
10. Shifting a register content to left by one bit position is equivalent to :
(a) division by two
(b) addition by two
(c) multiplication by two
(d) subtraction by two
Related Posts
Shift Registers » Exercise - 136. Assume a 4-bit parallel in/serial out shift register is loaded with a binary number. How many clock pulses are required after the parallel load has occurred before the first bit in the sequence appears on the serial output line? (a) 0 (b) 1 (c) 2 (d) 3- Shift Registers » Exercise - 130. A serial in/parallel out, 4-bit shift register initially contains all 1s. The data nibble 0111 is waiting to enter. After four clock pulses, the register contains ________. (a) 0000 (b) 1111 (c) 0111 (d) 1000
- Shift Registers » Exercise - 147. A 4-bit shift register that receives 4 bits of parallel data will shift to the ________ by ________ position(s) for each clock pulse. (a) right, one (b) right, two (c) left, one (d) left, three
- 5555555555 76. A 4-bit PISO shift register that receives 4 bits of parallel data will shift to the ________ by ________ position(s) for each clock pulse. (a) right, one (b) right, two (c) left, one (d) left, three
- Counters » Exercise - 164. What type of device is shown below? (a) 4-bit bidirectional universal shift register (b) Parallel in/parallel out shift register with bidirectional data flow (c) 2-way parallel in/serial out bidirectional register (d) 2-bit serial in/4-bit parallel out bidirectional shift register