5555555555
127. A positive edge-triggered J-K flip-flop is used to produce a two-phase clock. However, when the circuit is operated it produces erratic results. Close examination with a scope reveals the presence of glitches. What causes the glitches, and how might the problem be corrected?
(a) The PRESET and CLEAR terminals may have been left floating; they should be properly terminated if not being used.
(b) The problem is caused by a race condition between the J and K inputs; an inverter should be inserted in one of the terminals to correct the problem.
(c) A race condition exists between the Q and Q outputs to the AND gate; the AND gate should be replaced with a NAND gate.
(d) A race condition exists between the clock and the outputs of the flip-flop feeding the AND gate; replace the flip-flop with a negative edge-triggered J-K Flip-Flop.
| Subject Name : Electronics Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electronics & Communication Engineering Books |
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
555555555589. A J-K flip-flop is in a "no change" condition when ________. (a) J = 1, K = 1 (b) J = 1, K = 0 (c) J = 0, K = 1 (d) J = 0, K = 0- 555555555567. Why are the S and R inputs of a gated flip-flop said to be synchronous? (a) They must occur with the gate. (b) Th (c) (d)
- 555555555560. On a J-K flip-flop, when is the flip-flop in a hold condition? (a) J = 0, K = 0 (b) J = 1, K = 0 (c) J = 0, K = 1 (d) J = 1, K = 1
- 5555555555147. When the output of the NOR gate S-R flip-flop is Q = 0 and , the inputs are: (a) S = 1, R = 1 (b) S = 1, R = 0 (c) S = 0, R = 1 (d) S = 0, R = 0
- 555555555557. A correct output is achieved from a master-slave J-K flip-flop only if its inputs are stable while the: (a) clock is LOW (b) slave is transferring (c) flip-flop is reset (d) clock is HIGH