Counters » Exercise – 1
1. The purpose of introducing feedback loop in digital counter circuit is :
(a) To improve distortion
(b) To improve stability
(c) Synchronise input and output pulses
(d) to reduce the number of input pulses to reset the counter
2. The circuit shown below is a :
(a) Mod-4 counter
(b) Mod-5 counter
(c) Mod-6 counter
(d) Mod-7 counter
3. In this type of counter, the output of the last stage is connected to the D input of the first stage.
(a) Ring Counter
(b) Johnson Counter
(c) Straight Counter
(d) None of the above
4. A counter is a :
(a) Sequential circuit
(b) Combinational circuit
(c) Both combinational and sequential circuit
(d) None of above
5. A counter with 10 states :
(a) Cascading asynchronous counter
(b) Decade counter
(c) Asynchronous ripple counter
(d) Ripple counter
Related Posts
Counters » Exercise - 121. Which of the following is an invalid state in an 8421 BCD counter? (a) 0011 (b) 1001 (c) 1000 (d) 1100- Counters » Exercise - 173. List which pins need to be connected together on a 7492 to make a MOD-12 counter. (a) 1 to 12, 11 to 6, 9 to 7 (b) 1 to 12, 12 to 6, 11 to 7 (c) 1 to 12, 9 to 6, 8 to 7 (d) 1 to 12
- Counters » Exercise - 155. How many flip-flops are required to construct a decade counter? (a) 10 (b) 8 (c) 5 (d) 4
- Counters » Exercise - 120. How many different states does a 3-bit asynchronous counter have? (a) 2 (b) 4 (c) 8 (d) 16
- Counters » Exercise - 114. List which pins need to be connected together on a 7493 to make a MOD-12 counter. (a) 12 to 1, 11 to 3, 9 to 2 (b) 12 to 1, 11 to 3, 12 to 2 (c) 12 to 1, 11 to 3, 8 to 2 (d) 12 to 1, 11 to 3, 1 to 2