6. For any inverting amplifier, the impedance capacitance will be ________ by a Miller effect capacitance sensitive to the gain of the amplifier and the interelectrode capacitance.
(a) unaffected
(b) increased
(c) decreased
(d) None of the above
7. The Miller effect is meaningful in the ________ amplifier.
(a) inverting
(b) noninverting
(c) inverting/noninverting
(d) None of the above
8. The ________ configuration displays improved high-frequency characteristics over the ________ configuration.
(a) common-collector, common-emitter
(b) common-emitter, common-base
(c) common-emitter, common-collector
(d) common-base, common-emitter
9. If the parasitic capacitors were the only elements to determine the high cutoff frequency, the ________ frequency would be the determining factor.
(a) lowest
(b) highest
(c) lowest or highest
(d) None of the above
10. Logarithms taken to the base ________ are referred to as common logarithms, while logarithms taken to the base ________ are referred to as natural logarithms.
(a) 10, e
(b) e, 10
(c) 5, e
(d) 10, 5
Related Posts
555555555520. An amplifier rated at 30-W output is connected to a 5- speaker. Calculate the input power required for full power output if the power gain is 20 dB. (a) 3 mW (b) 30 mW (c) 300 mW (d) 3 W- 555555555525. An amplifier rated at 30-W output is connected to a 5- speaker. Calculate the input voltage for the rated output if the amplifier voltage gain is 20 dB. (a) 1.225 mV (b) 12.25 mV (c) 122.5 mV (d) 1.225 V
- 555555555526. An amplifier has an input signal voltage of 0.054 mV. The output voltage is 12.5 V. The voltage gain in dB is (a) 53.6 dB. (b) 107.3 dB. (c) 231 dB. (d) 116 dB.
- 555555555518. In the input RC circuit of a single-stage BJT, by how much does the base voltage lead the input voltage for frequencies much larger than the cutoff frequency in the low-frequency region? (a) About 0º (b) 45º (c) About 90º (d) None of the above
- 555555555541. The input power to a device is 10,000 W at 1000 V. The output power is 500 W, and the output impedance is 100 . Find the voltage gain in decibels. (a) –30.01 dB (b) –20.0 dB (c) –13.01 dB (d) –3.01 dB