11. Determine the lower cutoff frequency of this network.
(a) 15.8 Hz
(b) 46.13 Hz
(c) 238.73 Hz
(d) 1575.8 Hz
12. In the hybrid or Giacoletto model, which one of the following does rb include?
(a) Base spreading resistance
(b) Base contact
(c) Base bulk
(d) All of the above
13. The larger capacitive elements of the design will determine the ________ cutoff frequency.
(a) low
(b) mid
(c)
(d)
14. For the low-frequency response of a BJT amplifier, the maximum gain is where ________ .
(a) RB = 0
(b) RC = 0
(c)
(d)
15. Which of the low-frequency cutoffs determined by CS, CC, or CE will be the predominant factor in determining the low-frequency response for the complete system?
(a) lowest
(b) middle
(c) highest
(d) None of the above
Related Posts
555555555520. An amplifier rated at 30-W output is connected to a 5- speaker. Calculate the input power required for full power output if the power gain is 20 dB. (a) 3 mW (b) 30 mW (c) 300 mW (d) 3 W- 555555555525. An amplifier rated at 30-W output is connected to a 5- speaker. Calculate the input voltage for the rated output if the amplifier voltage gain is 20 dB. (a) 1.225 mV (b) 12.25 mV (c) 122.5 mV (d) 1.225 V
- 555555555526. An amplifier has an input signal voltage of 0.054 mV. The output voltage is 12.5 V. The voltage gain in dB is (a) 53.6 dB. (b) 107.3 dB. (c) 231 dB. (d) 116 dB.
- 555555555518. In the input RC circuit of a single-stage BJT, by how much does the base voltage lead the input voltage for frequencies much larger than the cutoff frequency in the low-frequency region? (a) About 0º (b) 45º (c) About 90º (d) None of the above
- 555555555541. The input power to a device is 10,000 W at 1000 V. The output power is 500 W, and the output impedance is 100 . Find the voltage gain in decibels. (a) –30.01 dB (b) –20.0 dB (c) –13.01 dB (d) –3.01 dB