5555555555
80. The main advantage of semiconductor RAM is its ability to:
(a) retain stored data when power is interrupted or turned off
(b) be written to and read from rapidly
(c) be randomly accessed
(d) be sequentially accessed
| Subject Name : Electronics Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electronics & Communication Engineering Books
|
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
Electronics Engineering » Notes » Memory Devices 1. All memory devices store binary logic levels (1s and 0s) in an array structure. The size of each binary word (number of bits) that is stored varies depending on the memory device. These binary values are referred to as data. 2. The place (location) in the memory device where any data value is stored is identified by another binary number referred to as an address.Each memory location has a unique address. 3. All memory devices operate in the same general way. To write data in memory, the address to be accessed is placed on the address input, the data value to be stored is applied to the data inputs, and the control signals are manipulated to store the data.To read data from memory, the address is applied, the control signals are manipulated, and the data value appears on the output pins. 4. Memory devices are often used along with a microprocessor CPU that generates the addresses and control signals and either provides the data to be stored or uses the data from the memory. Reading and writing are alwaysdone from the CPU’s perspective.Writing puts data into the memory, and reading gets data out of the memory. 5. Most read-only memories (ROMs) have data entered one…- 5555555555128. ROMs retain data when the ________. (a) power is off (b) power is on (c) system is down (d) all of the above
- 5555555555152. The checksum method is used to test ________. (a) ROM (b) EEPROM (c) FPLA (d) RAM
- 5555555555122. How many address bits are required for a 4096-bit memory organized as a 512 × 8 memory? (a) 2 (b) 4 (c) 8 (d) 9
- 5555555555100. How many 2K × 8 ROM chips would be required to build a 16K × 8 memory system? (a) 2 (b) 4 (c) 8 (d) 16