Counters – 85

Counters » Exercise – 1

85. Which of the following statements best describes the operation of a synchronous up-/down-counter?

(a) The counter can count in either direction, but must continue in that direction once started.
(b) The counter can be reversed, but must be reset before counting in the other direction.
(c) In general, the counter can be reversed at any point in its counting sequence.
(d) The count sequence cannot be reversed, once it has begun, without first resetting the counter to zero.

Answer : (c)
Explanation : No answer description available for this question. Let us discuss.
Subject Name : Electronics Engineering
Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant
Electronics & Communication Engineering Books

Question Bank On Electronics & Communication Engineering
Book - question bank on electronics & communication engineering; Language: english; Binding: paperback
₹ 287
A Handbook for Electronics Engineering(Old Edition)
Made Easy Editorial Board (Author); Marathi (Publication Language); 620 Pages - 01/01/2015 (Publication Date) - Made Easy Publications (Publisher)
₹ 320
Basic Electronic Devices and Circuits
Patil (Author); English (Publication Language)
Electronic Circuits: Analysis and Design (SIE) | 3rd Edition
Neamen, Donald (Author); English (Publication Language); 1351 Pages - 08/25/2006 (Publication Date) - McGraw Hill Education (Publisher)
₹ 1,265

GATE 2023 Total InfoENGG DIPLOMAUGC NET Total Info
IES 2023 Total InfoPSUs 2022 Total InfoCSIR UGC NET Total Info
JAM 2023 Total InfoM TECH 2023 Total InfoRAILWAY 2022 Total Info

Related Posts

  • Counters - 9Counters » Exercise - 1 9. It is a bi-directional counter capable of counting in either of the direction depending on the control signal. (a) Up Synchronous Counter (b) Down Synchronous Counter (c) Synchronous Counter (d) Both (a) and (b)
    Tags: counter, synchronous, counters, exercise, counting, direction, electronics, engineering
  • Counters - Exercise - 1Counters » Exercise - 1 1. The purpose of introducing feedback loop in digital counter circuit is : (a) To improve distortion (b) To improve stability (c) Synchronise input and output pulses (d) to reduce the number of input pulses to reset the counter 2. The circuit shown below is a : (a) Mod-4 counter (b) Mod-5 counter (c) Mod-6 counter (d) Mod-7 counter 3. In this type of counter, the output of the last stage is connected to the D input of the first stage. (a) Ring Counter (b) Johnson Counter (c) Straight Counter (d) None of the above 4. A counter is a : (a) Sequential circuit (b) Combinational circuit (c) Both combinational and sequential circuit (d) None of above 5. A counter with 10 states : (a) Cascading asynchronous counter (b) Decade counter (c) Asynchronous ripple counter (d) Ripple counter 6. In this type of counter, the complement of the output of the last stage of the shift register is fed back to the D input of the first state. (a) Ring Counter (b) Johnson Counter (c) Straight Counter (d) None of the above 7. It is a sequential circuit that cycles through a sequence of states : (a) Multiplexer (b) Demultiplexer (c) Counter…
    Tags: counter, electronics, engineering
  • Counters - 38Counters » Exercise - 138. The terminal count of a 3-bit binary counter in the DOWN mode is ________. (a) 000 (b) 111 (c) 101 (d) 010
    Tags: counters, exercise, count, counter, electronics, engineering
  • Counters - 111Counters » Exercise - 1111. ________ is the modulus of the counter shown below. (a) 200 (b) 19 (c) 0.005 (d) 5000
    Tags: counters, exercise, counter, electronics, engineering
  • Counters - 36Counters » Exercise - 136. The terminal count of a typical modulus-10 binary counter is ________. (a) 0000 (b) 1010 (c) 1001 (d) 1111
    Tags: counters, exercise, count, counter, electronics, engineering


Please enter your comment!
Please enter your name here