Telephone Engineering » Exercise – 1
20. The signal heard on the telephone line which indicates that the called subscriber set is in use.
(a) dial tone
(b) ringing tone
(c) busy tone
(d) congestion tone
Subject Name : Communication Engineering Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT
Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant
Electronics & Communication Engineering Books
GATE 2023 Total Info ENGG DIPLOMA UGC NET Total Info IES 2023 Total Info PSUs 2022 Total Info CSIR UGC NET Total Info JAM 2023 Total Info M TECH 2023 Total Info RAILWAY 2022 Total Info
Related Posts
Telephone Engineering » Exercise - 1 1. A condition of a telephone handset, in which it can be called, is _______ condition. (a) on-hook (b) off-hook (c) busy (d) none of these- Telephone Engineering » Exercise - 1 1. A condition of a telephone handset, in which it can be called, is _______ condition. (a) on-hook (b) off-hook (c) busy (d) none of these 2. The number to be dialed or called to reach a subscriber in the same local network or numbering area is : (a) Local Code (b) Area code (c) Toll access Code (d) Subscriber No. 3. That part of the telephone network between the telephone instrument at the subscriber premises and the central office equipment is called the __________. (a) Inter-office trunk (b) Tie Line (c) Subscriber loop (d) Service drop wire 4. A line linking telephone Central Offices is called _________ line. (a) Tie (b) Inter- office trunk (c) Routing (d) Connector 5. ________ is a unit of telephone traffic defined as one user making a call of one second duration. (a) CCS (b) Call-second (c) Erlangs (d) Call-hour 6. The following are the transmission media used for telephone systems except : (a) parallel wire (b) coaxial cable (c) fiber optics (d) NOTA 7. A method of multiplexing in which the total frequency spectrum available is used by each channel, but only for part of the time. (a)…
- Telephone Engineering » Exercise - 110. In telephony, tone dialing takes _________ time than pulse dialing. (a) less (b) more (c) about the same (d) can’t be determined
- Telephone Engineering » Exercise - 253. ISDN operates with a _______ connection speed. (a) 16 kbps (b) 14.4 kbps (c) 33.6 kbps (d) 128 kbps
- Telephone Engineering » Exercise - 252. ISDN is a(n) _______ technology. (a) wireless (b) copper wire (c) twisted-pair (d) coax and fiber