5555555555
57. Which of the following is (are) the disadvantage(s) of a class B complementary-symmetry circuit?
(a) It needs two separate voltage sources.
(b) There is crossover distortion in the output signal.
(c) It does not provide exact switching of one transistor off and the other on at the zero-voltage condition.
(d) All of the above
| Subject Name : Electronics Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electronics & Communication Engineering Books
|
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
555555555566. How many transistors must be used in a class B power amplifier to obtain the output for the full cycle of the signal? (a) 0 (b) 1 (c) 2 (d) 3- 555555555576. By how much does the output signal vary for a class AB power amplifier? (a) 360º (b) 180º (c) Between 180º and 360º (d) Less than 180º
- Regulated Power Supplies » Exercise - 3 101. In a simple series regulator circuit, which of the following components is the controlling element? (a) Load resistor (b) Zener diode (c) Transistor Q1 (d) None of the above 102. What regulated output voltage is provided for the following circuit elements: R1 = 15 kΩ, R2 = 35 kΩ, and VZ = 11.2 V? (a) 16.50 V (b) 17 V (c) 17.35 V (d) 18.25 V 103. Nota 104. Which component(s) set(s) the voltage across the load in a basic transistor shunt regulator? (a) Zener diode (b) Transistor base-emitter voltage (c) Both the Zener diode and the transistor base-emitter voltage (d) None of the above 105. In a full-wave rectifier, if no load were connected across the capacitor, the output voltage would ideally be a(n) ________. (a) ac voltage (b) constant dc voltage (c) pulsating dc voltage (d) ramp voltage 106. The output of a loaded power supply is ________ that of the unloaded. (a) the same as (b) larger than (c) smaller than (d) None of the above 107. The frequency of the output voltage of a full-wave rectifier is ________ the frequency of its input voltage. (a) the same as (b)…
- 5555555555 48. Determine VB1. (a) 0 V (b) 0.7 V (c) 9.3 V (d) 10.7 V
- 555555555551. In class B power amplifiers, the output signal varies for ________ of the cycle. (a) 360º (b) 180º (c) between 180º and 360º (d) less than 180º