Logic Families – 42


42. A TTL totem-pole circuit is designed so that the output transistors:

(a) are always on together
(b) provide linear phase splitting
(c) provide voltage regulation
(d) are never on together

Answer : (d)
Explanation : No answer description available for this question. Let us discuss.
Subject Name : Electronics Engineering
Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant
Electronics & Communication Engineering Books

Question Bank On Electronics & Communication Engineering
Book - question bank on electronics & communication engineering; Language: english; Binding: paperback
₹ 316
A Handbook for Electronics Engineering(Old Edition)
Made Easy Editorial Board (Author); Marathi (Publication Language); 620 Pages - 01/01/2015 (Publication Date) - Made Easy Publications (Publisher)
₹ 320
Basic Electronic Devices and Circuits
Patil (Author); English (Publication Language)
Electronic Circuits: Analysis and Design (SIE) | 3rd Edition
Neamen, Donald (Author); English (Publication Language); 1351 Pages - 08/25/2006 (Publication Date) - McGraw Hill Education (Publisher)
₹ 948

GATE 2023 Total InfoENGG DIPLOMAUGC NET Total Info
IES 2023 Total InfoPSUs 2022 Total InfoCSIR UGC NET Total Info
JAM 2023 Total InfoM TECH 2023 Total InfoRAILWAY 2022 Total Info

Related Posts

  • Regulated Power Supplies - Exercise - 3Regulated Power Supplies » Exercise - 3 101. In a simple series regulator circuit, which of the following components is the controlling element? (a) Load resistor (b) Zener diode (c) Transistor Q1 (d) None of the above 102. What regulated output voltage is provided for the following circuit elements: R1 = 15 kΩ, R2 = 35 kΩ, and VZ = 11.2 V? (a) 16.50 V (b) 17 V (c) 17.35 V (d) 18.25 V 103. Nota 104. Which component(s) set(s) the voltage across the load in a basic transistor shunt regulator? (a) Zener diode (b) Transistor base-emitter voltage (c) Both the Zener diode and the transistor base-emitter voltage (d) None of the above 105. In a full-wave rectifier, if no load were connected across the capacitor, the output voltage would ideally be a(n) ________. (a) ac voltage (b) constant dc voltage (c) pulsating dc voltage (d) ramp voltage 106. The output of a loaded power supply is ________ that of the unloaded. (a) the same as (b) larger than (c) smaller than (d) None of the above 107. The frequency of the output voltage of a full-wave rectifier is ________ the frequency of its input voltage. (a) the same as (b)…
    Tags: voltage, output, electronics, engineering
  • Logic Families - 1045555555555104. The HIGH logic level for a standard TTL output must be at least ________. (a) 2.4 V (b) 2 V (c) 0.8 V (d) 5 V
    Tags: logic, families, ttl, output, electronics, engineering
  • Programmable Logic Devices - 38555555555538. The output of this circuit is always ________. (a) 1 (b) 0  (c) A (d) A
    Tags: logic, output, circuit, electronics, engineering
  • Programmable Logic Devices - 39555555555539. The output of this circuit is always ________. (a) 1 (b) 0   (c) A (d) A
    Tags: logic, output, circuit, electronics, engineering
  • Logic Families - 47555555555547. What is the range of invalid TTL output voltage? (a) 0.0–0.4 V (b) 0.4–2.4 V (c) 2.4–5.0 V (d) 0.0–5.0 V
    Tags: logic, families, ttl, output, voltage, electronics, engineering


Please enter your comment!
Please enter your name here