DC Biasing BJTs – 18

5555555555

18. Which of the following is (are) related to an emitter-follower configuration?

(a) The input and output signals are in phase.
(b) The voltage gain is slightly less than 1.
(c) Output is drawn from the emitter terminal.
(d) All of the above

Answer
Answer : (d)
Explanation
Explanation : No answer description available for this question. Let us discuss.
Subject Name : Electronics Engineering
Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT
Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant
Electronics & Communication Engineering Books

Sale
Question Bank On Electronics & Communication Engineering
Highlight important details or key points; Summarize information in a clear and concise manner
₹ 317
Sale
A Handbook for Electronics Engineering(Old Edition)
Made Easy Editorial Board (Author); Marathi (Publication Language); 620 Pages - 01/01/2015 (Publication Date) - Made Easy Publications (Publisher)
₹ 320
Basic Electronic Devices and Circuits
Patil (Author); English (Publication Language)
Sale
Electronic Circuits: Analysis and Design (SIE) | 3rd Edition
Neamen, Donald (Author); English (Publication Language); 1351 Pages - 08/25/2006 (Publication Date) - McGraw Hill Education (Publisher)
₹ 799

GATE 2023 Total InfoENGG DIPLOMAUGC NET Total Info
IES 2023 Total InfoPSUs 2022 Total InfoCSIR UGC NET Total Info
JAM 2023 Total InfoM TECH 2023 Total InfoRAILWAY 2022 Total Info

Related Posts

  • DC Biasing BJTs - 23555555555523. Calculate the value of VCEQ. (a) 8.78 V (b) 0 V (c) 7.86 V (d) 18 V
    Tags: dc, biasing, bjts, electronics, engineering
  • Regulated Power Supplies - Exercise - 3Regulated Power Supplies » Exercise - 3 101. In a simple series regulator circuit, which of the following components is the controlling element? (a) Load resistor (b) Zener diode (c) Transistor Q1 (d) None of the above 102. What regulated output voltage is provided for the following circuit elements: R1 = 15 kΩ, R2 = 35 kΩ, and VZ = 11.2 V? (a) 16.50 V (b) 17 V (c) 17.35 V (d) 18.25 V 103. Nota 104. Which component(s) set(s) the voltage across the load in a basic transistor shunt regulator? (a) Zener diode (b) Transistor base-emitter voltage (c) Both the Zener diode and the transistor base-emitter voltage (d) None of the above 105. In a full-wave rectifier, if no load were connected across the capacitor, the output voltage would ideally be a(n) ________. (a) ac voltage (b) constant dc voltage (c) pulsating dc voltage (d) ramp voltage 106. The output of a loaded power supply is ________ that of the unloaded. (a) the same as (b) larger than (c) smaller than (d) None of the above 107. The frequency of the output voltage of a full-wave rectifier is ________ the frequency of its input voltage. (a) the same as (b)…
    Tags: voltage, output, electronics, engineering
  • BJT Amplifiers - 64555555555564. For the common-emitter fixed-bias configuration, there is a ________ phase shift between the input and output signals. (a) 0º (b) 45º (c) 90º (d) 180º
    Tags: configuration, phase, input, output, signals, electronics, engineering
  • DC Biasing BJTs - 22555555555522. Calculate the voltage across the 91 k resistor. (a) 18 V (b) 9.22 V (c) 3.23 V (d) None of the above
    Tags: dc, biasing, bjts, voltage, electronics, engineering
  • BJT - 31555555555531. What is the ratio of IC to IE? (a) DC (b) DC / (DC + 1) (c) DC (d) either DC / (DC + 1) or DC, but not DC
    Tags: dc, electronics, engineering

LEAVE A REPLY

Please enter your comment!
Please enter your name here