5555555555
34. In a two-source circuit, one source acting alone produces 12 mA through a given branch. The other source acting alone produces 10 mA in the opposite direction through the same branch. The actual current through the branch is ________.
(a) 22 mA
(b) 12 mA
(c) 10 mA
(d) 2 mA
| Subject Name : Electrical Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electrical Engineering Books
|
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
5555555555 25. A 120 V voltage source has a source resistance, RS, of 60 Ω. The equivalent current source is ________. (a) 2 A (b) 4 A (c) 200 mA (d) 400 mA- 5555555555 22. There is a total of 800 mA of current into four parallel resistors. The currents through three of the resistors are 40 mA, 70 mA, and 200 mA. The current through the fourth resistor is ________. (a) 490 mA (b) 800 mA (c) 310 mA (d) 0 A
- 5555555555 45. The Norton equivalent current is ________. (a) the current through the load (b) the open-current from the source (c) the short circuit current (d) none of the above
- 5555555555 6. In a parallel RL circuit, there are 3 A rms in the resistive branch and 3 A rms in the inductive branch. The total rms current is ________. (a) 6 A (b) 424 mA (c) 4.24 A (d) 42.4 A
- 5555555555 15. If you wish to increase the amount of current in a resistor from 120 mA to 160 mA by changing the 24 V source, what should the new voltage setting be? (a) 8 V (b) 320 V (c) 3.2 V (d) 32 V