5555555555
63. What does the negative sign in the voltage gain of the common-emitter fixed-bias configuration indicate?
(a) The output and input voltages are 180º out of phase.
(b) Gain is smaller than 1.
(c) Gain is larger than 1.
(d) None of the above
| Subject Name : Electronics Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electronics & Communication Engineering Books
|
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
555555555584. The output voltage and the input voltage are ________ for the common-emitter configuration. (a) in phase (b) 45º out of phase (c) 90º out of phase (d) 180º out of phase- 555555555574. The output voltage and the input voltage are ________ for the common-base configuration. (a) 45º out of phase (b) 90º out of phase (c) 180º out of phase (d) in phase
- 555555555569. In an emitter-follower, the voltage gain is ________. (a) slightly less than 1 (b) slightly more than 1 (c) a very large value (d) None of the above
- 555555555516. In a common-base configuration, the input and output voltages are ________ and the output and input currents are ________. (a) 180º out of phase, 180º out of phase (b) 180º out of phase, in phase (c) in phase,180º out of phase (d) in phase, in phase
- Regulated Power Supplies » Exercise - 3 101. In a simple series regulator circuit, which of the following components is the controlling element? (a) Load resistor (b) Zener diode (c) Transistor Q1 (d) None of the above 102. What regulated output voltage is provided for the following circuit elements: R1 = 15 kΩ, R2 = 35 kΩ, and VZ = 11.2 V? (a) 16.50 V (b) 17 V (c) 17.35 V (d) 18.25 V 103. Nota 104. Which component(s) set(s) the voltage across the load in a basic transistor shunt regulator? (a) Zener diode (b) Transistor base-emitter voltage (c) Both the Zener diode and the transistor base-emitter voltage (d) None of the above 105. In a full-wave rectifier, if no load were connected across the capacitor, the output voltage would ideally be a(n) ________. (a) ac voltage (b) constant dc voltage (c) pulsating dc voltage (d) ramp voltage 106. The output of a loaded power supply is ________ that of the unloaded. (a) the same as (b) larger than (c) smaller than (d) None of the above 107. The frequency of the output voltage of a full-wave rectifier is ________ the frequency of its input voltage. (a) the same as (b)…