6. The forward characteristic of a diode has a slope of approximately 50 mA/V at a desired point. The approximate incremental resistance of the diode is :
(a) 50 Ω
(b) 35 Ω
(c) 20 Ω
(d) 10 Ω
7. The time required to switch a PN junction from ON to OFF is equal to :
(a) Zero
(b) Storage time
(c) Switching time
(d) Transition time
8. Fast switching of PN junction requires :
(a) A large current in reverse direction
(b) Zero current in reverse direction
(c) Reverse saturation current in reverse direction
(d) None of the above
9. The storage time of a PN junction :
(a) Decreases with increased reverse-bias
(b) Decreases with increased forward-bias
(c) Increases with increased reverse-bias
(d) Increases with increased forward-bias
10. The delay in the switching mode operation of a PN junction diode is mainly due to :
(a) Metallic contacts
(b) Different doping levels
(c) Minority charge storage in the junction during forward biased condition
(d) Majority carriers in forward biased condition
Related Posts
PN Junction Diode » Exercise - 13. Diffusion capacitance is a capacitance of a : (a) reverse biased semiconductor diode junction caused by unequal doping (b) reverse biased semiconductor diode junction caused by equal doping (c) forward biased semiconductor diode junction caused by unequal doping (d) forward biased semiconductor diode junction caused by equal doping- PN Junction Diode » Exercise - 121. Which one is the valid statement with respect to PN junction diode ? (a) Under forward bias, the electrons from P region & holes from N region drift towards the junction (b) A junction diode cannot be used as a switch in electrical circuits (c) Depletion capacitance is voltage independent (d) Diffusion current of minority carriers is proportional to the concentration gradient
- Electronics Engineering » PN Junction Diode » IQ 1. What is depletion region in PN junction ? The region around the junction from which the mobile charge carriers (electrons and holes) are depleted is called as depletion region. Since this region has immobile ions, which are electrically charged, the depletion region is also known as space charge region. 2. Give the other names of depletion region ? i. space charge region ii. Transition region 3. What is barrier potential ? Because of the oppositely charged ions present on both sides of PN junction an electric potential is established across the junction even without any external voltage source which is termed as barrier potential. 4. What is meant by biasing a PN junction ? Connecting a PN junction to an external voltage source is biasing a PN junction. 5. What are the types of biasing a PN junction ? 1. Forward bias 2. Reverse bias. 6. What is forward bias and reverse bias in a PN junction ? When positive terminal of the external supply is connected to P region and negative terminal to N region, the PN junction is said to be forward biased. Under forward biased condition the PN region offers a very low resistance and a large amount of current flows through it. 7. What is reverse bias in a PN junction ? When positive terminal of the external supply…
- PN Junction Diode » Exercise - 141. In case of P-N junction diode, at high reverse bias the current rises sharply. This value of reverse bias is called - (a) Peak inverse ratio (b) Zenner voltage (c) Cut off bias (d) Saturation voltage
- PN Junction Diode » Exercise - 1& 18. What is the type of capacitance effect exhibited by the PN junction, when it is reverse biased ? (a) Transition capacitance (b) Diffusion capacitance (c) Space charge capacitance (d) Drift capacitance