26. The light emitting diode :
(a) Usually made from metal oxide
(b) Is Used in reverse biased condition
(c) Gives light when temperature increases
(d) Gives light due to electron hole recombination
27. The numeric aperture is the fiber optic cable’s ability :
(a) To collect the light
(b) To diffract the light
(c) To reflect the light
(d) To refract the light
28. An LCD requires a power of about :
(a) 20 W
(b) 20 mW
(c) 20 μW
(d) 20 nW
29. The advantages of opto isolators is/are :
(a) Easy to interface with logic devices
(b) Capable of wide band signal transmission
(c) Problems such as noise transients, contact bounce is completely eliminated
(d) All of the above
30. To display the digit 8 in a seven-segment indicator :
(a) C must be lighted
(b) G must be off
(c) F must be on
(d) All segments must be lighted
Related Posts
Opto Electronics » Exercise - 136. When the light increases, the reverse current in a photo-diode : (a) increases (b) decreases (c) is unaffected (d) none of the above- Opto Electronics » Exercise - 132. When the light increases, the reverse current in a photo-diode : (a) increases (b) decreases (c) is unaffected (d) none of the above
- Opto Electronics » Exercise - 118. Compared to visible red light emitting diode, an infrared LED : (a) Produces light with longer wavelength (b) Produces light with shorter wavelength (c) Produces light with medium wavelength (d) Produces light of all wavelengths
- Opto Electronics » Exercise - 1 1. Consider the following statements 1. LED is also known as direct gap diode. 2. LCD generates light. of these statements : (a) 1 is correct but 2 is wrong (b) 2 is correct but 1 is wrong (c) both 1 & 2 are correct (d) both 1 & 2 are wrong
- Display Devices and Systems » Exercise - 1 5. LED means : (a) Liquid emitting display (b) Liquid energy display (c) Light emitting diode (d) Liquid emitting detector