106. What is the difference voltage if the inputs are an ideal in-phase signal?
(a) The differential gain times twice the input signal.
(b) The differential gain times the input signal.
(c) The common-mode gain times twice the input signal.
(d) The common-mode gain times the input signal.
107. What is the slew rate of an op-amp if the output voltages change from 2 V to 3 V in 0.2 ms?
(a) 5 V/ms
(b) 3 V/ms
(c) 2 V/ms
(d) 1 V/ms
108. What is the cutoff frequency of an op-amp if the unity-gain frequency is 1.5 MHz and the open-loop gain is 100,000?
(a) 5 Hz
(b) 10 Hz
(c) 15 Hz
(d) 20 Hz
109. Calculate the output impedance of an inverting op-amp using the 741 op-amp (ro = 75 Ω, AOL = 200 V/mV) if R1 = 100 Ω and Rf = 1 kΩ.
(a) 0.011
(b) 0.00375
(c) 0.0375
(d) 0.375
110. What is the open-loop gain of an op-amp at the gain-bandwidth product of the op-amp?
(a) 200,000
(b) 50,000
(c) 200
(d) 1
Related Posts
5555555555143. With negative feedback, the returning signal (a) is proportional to the output current (b) is proportional to the differential voltage gain (c) opposes the input signal (d) aids the input signal- 5555555555102. What is the difference voltage if the inputs are an ideal opposite signal? (a) The differential gain times twice the input signal. (b) The differential gain times the input signal. (c) The common-mode gain times twice the input signal. (d) The common-mode gain times the input signal.
- 5555555555106. What is the difference voltage if the inputs are an ideal in-phase signal? (a) The differential gain times twice the input signal. (b) The differential gain times the input signal. (c) The common-mode gain times twice the input signal. (d) The common-mode gain times the input signal.
- 5555555555188. With negative feedback, the returning signal: (a) aids the input signal (b) is proportional to output current (c) opposes the input signal (d) is proportional to differential voltage gain
- 5555555555145. A differential amplifier has a common-mode gain of 0.2 and a common-mode rejection ratio of 3250. What would the output voltage be if the single-ended input voltage was 7 mV rms? (a) 1.4 mV rms (b) 650 mV rms (c) 4.55 V rms (d) 0.455 V rms