5555555555
84. A “floating” TTL input may be defined as:
(a) unused input that is tied to Vcc through a 1 k resistor.
(b) unused input that is tied to used inputs.
(c) unused input that is tied to the ground.
(d) unused input that is not connected.
| Subject Name : Electronics Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electronics & Communication Engineering Books |
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
555555555585. Generally, the voltage measured at an unused TTL input would typically be measured between: (a) 1.4 to 1.8 V. (b) 0 to 5 V. (c) 0 to 1.8 V. (d) 0.8 to 5 V.- 5555555555161. Assume that you have a 3-input NAND gate but need only a 2-input gate. The unused input should be ________. (a) connected to ground (b) left open (c) connected to a HIGH (d) any of the above
- 555555555562. If the input to a NOT gate is A and the output is X, then ________. (a) X = A (b) (c) X = 0 (d) none of the above
- 5555555555127. When does the output of a NOR gate = 0? (a) Whenever a 0 is present at an input (b) Only when all inputs = 0 (c) Whenever a 1 is present at an input (d) Only when all inputs = 1
- 5555555555124. When does the output of a NAND gate = 1? (a) Whenever a 0 is present at an input (b) Only when all inputs = 0 (c) Whenever a 1 is present at an input (d) Only when all inputs = 1