26. Inaccurate analog-to-digital conversion may be due to ____________.
(a) constant analog input voltage
(b) linear ramp usage
(c) intermittent counter inputs
(d) faulty sample-and-hold circuitry
Related Posts
55555555556. A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the input code 0101. (a) 0.3125 V (b) 3.125 V (c) 0.78125 V (d) –3.125 V- 555555555525. The characteristic that a change of one binary step on the input of a digital-to-analog converter (DAC) should cause exactly one step change on the output is called ________. (a) resolution (b) monotonicity (c) linearity (d) accuracy
- 555555555519. The problems of the binary-weighted resistor digital-to-analog converter (DAC) can be overcome by using ___________. (a) an 8-bit binary-weighted resistor DAC (b) an R/2R ladder DAC (c) a staircase DAC (d) a flash DAC
- 55555555557. What is the resolution of a digital-to-analog converter (DAC)? (a) It is the comparison between the actual output of the converter and its expected output. (b) It is the deviation between the ideal straight-line output and the actual output of the converter. (c) It is the smallest analog output change that can occur as a result of an increment in the digital input. (d) It is its ability to resolve between forward and reverse steps when sequenced over its entire range.
- 555555555524. A binary-weighted resistor used in a digital-to-analog converter (DAC) is only practical up to a resolution of ________. (a) 10 bits (b) 2 bits (c) 8 bits (d) 4 bits