5555555555
2. Instrumentation amplifiers are normally used to measure
(a) small differential signal voltages.
(b) signals superimposed on a common-mode voltage often much larger than the signal voltage.
(c) both of the above
(d) none of the above
| Subject Name : Electronics Engineering |
| Exam Name : IIT GATE, UPSC ESE, RRB, SSC, DMRC, NMRC, BSNL, DRDO, ISRO, BARC, NIELIT |
| Posts Name : Assistant Engineer, Management Trainee, Junior Engineer, Technical Assistant |
| Electronics & Communication Engineering Books
|
| GATE 2023 Total Info | ENGG DIPLOMA | UGC NET Total Info |
| IES 2023 Total Info | PSUs 2022 Total Info | CSIR UGC NET Total Info |
| JAM 2023 Total Info | M TECH 2023 Total Info | RAILWAY 2022 Total Info |
Related Posts
Electronics Engineering » Notes » Operational Amplifier 1. The Op Amp is a widely used amplifier abstraction that forms the foundations of much of electronic circuit design. Op Amp devices are constructed using primitive elements such as transistors and resistors. 2. The Op Amp is a four-ported device. The ports include an input port with terminals usually labeled v+ and v− , an output port with one terminal labeled vo, and the other being ground, a positive power supply port with a +VS voltage applied with respect to ground, and a negative power supply port with a −VS voltage applied with respect to ground. Although the ground terminal is not explicitly shown in the Op Amp symbol, it is very much a part of all Op Amp circuits. 3. The Op Amp behaves like a voltage-dependent voltage source. Its input output relationship can can be expressed mathematically as vo=A(v+−v−) where A is a large number called the open loop gain of the amplifier. In most practical Op Amp applications, A is treated as infinity. 4. Most useful Op Amp circuits are built using the negative feedback connection, in which a portion of the output signal of the Op Amp is fed back to the v− input of the Op Amp. Examples of Op Amp circuits…- 55555555558. The voltage gain of a voltage buffer is ________ . (a) 1 (b) 0 (c) –1 (d) –5
- 555555555542. The basic instrumentation amplifier has ________ input(s). (a) 1 (b) 2 (c) capacitive (d) resistive
- 555555555528. The process known as signal compression is used with a(n) ____ amplifier. (a) log (b) antilog (c) instrumentation (d) isolation
- 555555555520. Calculate the output voltage if V1 = –3.3 V and V2 = 0.8 V. (a) 0 V (b) 6.6 V (c) –4 V (d) 2 V