6. The gate voltage required for the conduction of an n-channel enhanced mode MOSFET having a threshold voltage of 2V is :
(a) 0 V
(b) 1 V
(c) 2 V
(d) More than 2 V
7. The main application of the enhancement mode MOSFET is :
(a) Amplification
(b) Switching
(c) Tuning
(d) Rectification
8. …….. is an excellent device for interfacing digital IC’s to high power loads.
(a) Depletion mode power MOSFET
(b) Enhancement mode power MOSFET
(c) JFET
(d) Bipolar transistor
9. VMOS transistor is basically :
(a) Power transistor
(b) Three diodes connected parallelly
(c) JFET
(d) Enhanced-mode MOSFET
10. A MOSFET has ……. terminals.
(a) two
(b) five
(c) four
(d) three
Related Posts
MOSFET » Exercise - 1 1. For a MOSFET, the gate current : (a) Is dependent on drain current (b) Is negligibly small (c) Is independent of gate voltage (d) Increases with increase in gate voltage- MOSFET » Exercise - 12. For an n-channel enhancement mode MOSFET, the drain current : (a) Decreases with increases in drain voltage (b) Decreases with decrease in drain voltage (c) Increases with increases in gate voltage (d) Increases with decrease in gate voltage
- MOSFET » Exercise - 116. A certain D-MOSFET is biased at VGS = 0V. Its data sheet specifies IDSS = 20 mA and VGS (off) = – 5V. The value of the drain current is ............... (a) 20 mA (b) 0 mA (c) 40 mA (d) 10 mA
- MOSFET » Exercise - 118. A certain p-channel E-MOSFET has a VGS (th) = – 2V. If VGS = 0V, the drain current is ......... (a) 0 mA (b) ID (on) (c) maximum (d) IDSS
- 555555555588. When VGS = 0 on an N-channel MOSFET switch, there is no ________ between the source and the drain. (a) voltage drop (b) conductive channel (c) capacitance (d) inductance